---
url: /posts/2026/shaky-embedded-controller-states-on-linux.md
description: >-
  Corrupted EC/ACPI state on Asus Zenbook laptops under Linux — symptoms, likely
  triggers, and the fix that worked for me.
---

I experienced weird issues on two different laptops (one AMD, one Intel) that I pinpointed to **corrupted EC/ACPI firmware state**.

## The Root Cause

The most likely root cause is a bug somewhere in the kernel, the sensors subsystem, or the ACPI/WMI implementation for this hardware. The trigger I identified was having GNOME extensions installed that continuously poll hardware sensors (CPU frequency, GPU frequency, battery status etc). Those reads go through `asus_wmi`, which communicates with the EC — and something in that chain causes the EC to eventually enter a corrupted state.

> The only way to recover from this state is still to power drain/cycle the laptop: hold power button for 60+ seconds while no psu is connected. This resets the EC firmware.

## Stumbling on The Fix

Totally unrelated and while researching some other issue, I glanced at the title of a thread that suggested that lm_sensors may glitch out after waking from suspend.

This inspired me to simply turn off the extensions that keep hammering the EC (probably via asus_nb_wmi) for information and *since then I have not experienced the issue anymore*.

I will update this post if I experience it again but for now, disabling those extensions eliminated the issue for me.

As a bonus on my Intel platform, I can use 120 Hz refresh rate now without constant screen flickering.

## Symptoms of EC / ACPI state corruption on Linux

I wrote two posts which I have now deleted since I found the root cause but I keep the summary of symptoms here for future reference.

* Extremely slow reboots, **LUKS passphrase screen takes over a minute** to appear
* Slow or failed **wake from suspend**
* Choppy boot-screen spinner (>20 s) — reliable early warning
* Choppy login screen animation
* **Touchpad dropping inputs** or completely unresponsive
* **No audio**, only "dummy output" in PulseAudio / PipeWire
* **Fn / keyboard hotkeys** (brightness, volume) **freeze the system for ~10 seconds**
* Keyboard backlight unresponsive
* **Howdy** face-recognition login stops working
* Erratic **CPU frequency scaling**, general slowness
* Sensors unavailable, GPU settings gone, Wayland instability
* Connectivity issues
* `dmesg` produces no helpful output during freezes (fault is below the kernel, in EC firmware)
